EGBE206L-*** | EverGrip® Molded 100A 125 VAC Stage Pin (Bates) Extension | LEX Products

EverGrip® Molded 100A 125 VAC Stage Pin (Bates) Extension

EverGrip® Molded 100A 125 VAC Stage Pin (Bates) Extension

100A 125 VAC, (1) Molded 100A Stage Pin (Bates) Male (Plug) to (1) Molded 100A Stage Pin (Bates) Female (Connector), (2) #4 Type SC Black and (1) #6 Type SC Green Cables (Banded), Extension

Part NumberEGBE206L-xxx
Functions Power 
Markets Entertainment 
Connector Type(s) Stage Pin 
Amperage100A
Certifications Certification Icon
Data Sheet Print / Save As

Features & Benefits

- Rugged, one-piece connector construction eliminates joints and loose assembly screws and inhibits infiltration and contaminants
- Thermoset resin contact carrier resists electrical tracking and can withstand higher temperatures caused by overload
- As the first-ever cULus Listed stage pin assembly, each extension is high potential tested to 1500 Volts prior to shipping to ensure compliance
- Premold design bonds the cable to the connector to provide superior strain relief and maintain secure terminations
- Overmold is UV stabilized to prevent degradation of connector housing when used outdoors
- Exclusive ergonomic, tapered hand grip provides a firm gripping surface for easy connector mating and unmating
- 100 Amp extensions are made with single conductor type SC cable and banded every 2 feet with heavy-duty sealant type heat shrink tubing
- Amperage and voltage ratings are clearly marked on connector exteriors
- Matte black exterior conceals 125 Volt extensions for stage and studio applications

Markets Served

Motion Picture and Television Production

Technical Information

Rating: 100 Amp, Single-phase (H,N,G), 2-pole, 3-wire, 125 VAC, 60 Hz
Male Plug: (1) Molded 100A Stage Pin (Bates) Male (Plug), Black
Cable/Cord: (2) #4 Type SC Black and (1) #6 Type SC Green Cables, Banded
Length: xxx = Length
Female Connector: (1) Molded 100A Stage Pin (Bates) Female (Connector), Black
Weight: 0 lbs
Agency Approval: N/A