The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.
Converts Ethernet signals into (16) channels of analog voltage
Part Number | PCS-I-DEMULT-ETHER |
---|---|
Selection | Install |
Certifications | ![]() |
Data Sheet | Print / Save As |
- The Demultiplexer supports the following control protocols: E1.31 sACN, Art-Net
- A dry contact closure input provides a panic overide
- When the input is shorted (closed), all outputs shall be forced to full on, regardless of input values
- Pushbuttons on the device components provided for system configuration
- LED display provides information for panel configuration
- LED indicators display power and processor state
- Contact Closure 'panic' input drives all outputs to full
- Sixteen analog outputs
- Selectable 0-10, 0-15, 0-2.5, & 0-5V output modes, or fully user-customized min/max
- DMX pass-thru connector
Markets Served
Theatres, Studios, Convention Centers, Houses of Worship, Schools & Universities, Gymnasiums, Auditoriums
-Rating: 15 Amp, 125 VAC, Single Phase, 2-Pole, 3-Wire
-Environmental Rating: NEMA Type 1 (Indoor Use)
-Input: (1) Ethernet signal, screw terminal block, wire range: #26 - #16 AWG, panel mount
-Output: (16) 0-10 VDC analog signals, screw terminal block, wire range: #26 - #16 AWG, panel mount
-Feed Thru: (1) DMX-512A, screw terminal block, wire range: #26 - #16 AWG, panel mount
-Overcurrent Protection: None
-Enclosure Type: PCS TRIO™ Demultiplexer, steel
-Dimensions: 4.50"L x 10.00"W x 23.00"H
-Weight: 10.00 lbs