(1) 20A 125 VAC, Single Pole Dimmer and (2) 20A 125 VAC, Single Pole Relays, PCS TRIO™ Module
Part Number | PCS-A-MD-DRR |
---|---|
Selection | Install Touring |
Certifications | |
Data Sheet | Print / Save As |
- Dimmers shall be of the solid-state relay (SSR) type using silicon controlled rectifiers (SCR) arranged in an inverse parallel configuration.
- A toroidal filter assembly modifies the rate of current rise ('rise time') within that circuit and operates with a rise time of 350µs
- Single Pole Relay circuits utilize mechanically latching, open-air type relays rated for 500,000 cycles
- Relays maintain last state (open or closed) until signaled or manually manipulated
- Dimmer and relay circuits possess zero-cross detection for trigger timing
- The SCR dimmer and single pole relays are mounted to a vertical PCB to increase heat dissipation.
- Stacked modules within a Module Chamber utilize a 'plenum' effect to maximize cooling via convection
- Individual modules possess over-temperature sensing
Markets Served
Theatres, Studios, Convention Centers, Houses of Worship, Schools & Universities, Gymnasiums, Auditoriums
-Rating: 20 Amp, 3 Phase (H,H,H), 3-Pole, 3-Wire, 120/208Y VAC
-Environmental Rating: NEMA Type 1 (Indoor Use)
-Input: (1) PCS TRIO backplane buss connection
-Output: (1) PCS TRIO backplane PCB connection
-Feed Thru: None
-Overcurrent Protection: (3) 20 Amp, 120 VAC, single pole, hydraulic magnetic, branch-rated circuit breakers
-Enclosure Type: PCS TRIO™ Module, steel
-Dimensions: 11.55"L x 11.60"W x 3.05"H
-Weight: 7.88 lbs