100A 125 VAC, (1) 100A 125 VAC Stage Pin (Bates) Male (Inlet) to (5) NEMA 5-20 (Edison) Straight Blade Receptacles (Outlets) and (4) USB Type A Receptacles, Wireless DMX Opto-Splitter, Feed Thru, LOpSter™
| Part Number | PH100W-NDC-15CC-WCAT |
|---|---|
| Markets | Entertainment |
| Rating | Indoor |
| Enclosure | Box |
| Input | Stage Pin |
| Output | NEMA |
| Amperage | 100A |
| Certifications |  |
| Data Sheet | Print / Save As |
- The LOpSter TrapTM combines the function of electrical power “lunch boxes” with the data distribution of an “opto-splitter”, both of which are typically found in studios and on locations
- One box to inventory, transport, set up and strike as opposed to two
- The DMX512 Splitter/Repeater may act as either a transmitter or reciever with the touch of a button and utilizes CRMX or W-DMX for reliable wireless DMX transmission
- 4.2A 4-Port USB Type-A Outlet Charger Receptacle for convenient powering of electronics
- Hydraulic magnetic breakers will not nuisance trip at higher temperatures and are mounted flush for easy access and circuit identification
- Brightly colored receptacles increase visibility in low-light situations
- Threaded inserts for brackets provide easy mounting of C-Clamps
Markets Served
Theatrical, Motion Picture, Television Production
| Rating: | 100 Amp, Single-phase (H,N,G), 2-pole, 3-wire, 125 VAC, 60 Hz |
|---|---|
| Environmental Rating: | NEMA Type 1 (Indoor Use) |
| Input: | (1) Stage Pin (Bates), 100 Amp, 2-pole, 3-wire, 125 VAC inlet, panel mount |
| Feed Thru: | Yes |
| Main Breaker: | None |
| Output: | (5) NEMA 5-20 (Edison), 20 Amp, 2-pole, 3-wire, 125 VAC, straight blade duplex receptacles, panel mount; (4) USB Type A, 4.2 Amp, 2-pole, 3-wire, 125 VAC 4-port receptacles, panel mount |
| Overcurrent Protection: | (5) 20 Amp, 125 VAC, single-pole, hydraulic magnetic, branch-rated circuit breakers |
| Data Input: | Wireless DMX (CRMX) or Wired 5-Pin XLR Inlet, DMX512 |
| Data Feed Thru: | Yes |
| Data Output: | (4) Optically Isolated 5-Pin XLR Receptacles |
| Enclosure Type: | LOpSter™ |
| Dimensions: | 10.25”W x 11.50”H x 8.00”D |
| Weight: | 13.5 lbs |
| Agency Approval: |
Lex Connector Solutions (LCS)
