Custom Configured Aluminum Extrusion Housing for Overhead Power Distribution
| Part Number | PP-xxx |
|---|---|
| Category | Theatrical Distribution |
| Markets | Entertainment |
| Environmental Rating | Indoor |
| Amperage | 20A - 60A |
| Certifications |  |
| Data Sheet | Print / Save As |
- Connector Strips are used overhead for power distribution and DMX512 to lighting fixtures in theaters and other places of assembly
- Connector strips are often located on suspended pipes over stages and on pipes and catwalks over an audience
- Design can accommodate a variety of connector types and hangers to match your application
- Aluminum extrusion is inherently light weight and rustproof for longer life and better appearance
- Rigid extrusion will not bend or flex
- DMX data option provides an integrated data and power distribution solution
- Pre-wired assemblies make installation fast and easy
Theatrical, Motion Picture and Television Production, Convention Centers, Houses of Worship
| Rating: | Various, depending upon configuration |
|---|---|
| Environmental Rating: | NEMA Type 1 Indoor |
| Input: | Molded barriered terminal block |
| Output: |
Various, depending upon configuration |
| Feed Thru: | Various, depending upon configuration |
| Overcurrent Protection: | None |
| Enclosure Type: | Powder-coated aluminum extrusion |
| Color: | Black (additional colors available upon request) |
| Overall Dimensions: | Various, depending upon configuration |
| Weight: | 4 lbs. per ft with hangers (approximately) |
| Circuit Labeling | 2" white die-cut numbers standard. Lamacoid numbering optional. |
| See data sheet for ordering information chart and specification |
Lex Connector Solutions (LCS)